Water creates fantastic force if generated properly. Waterjet cutting is able to be used to cut into steel and many other materials. Water is opening new horizons as it is used as an industrial tool. Focusing to a fine point water is how it is used in cutting metal. Through a small nozzle fitted with a small jewel the waterjet cuts water as it is funneled a an extremely high pressure.

Pressurized to ultra high levels and channeled through a tiny orifice water cuts precise contours through almost any material. It essentially turns the water into a laser. It provides all you need for the perfect cut. The ultra high pressure system is the heart of the cutting system. The intense pressure is generated by an intense pump system.

The unique plunger system reciprocates forth and back and is powered up to 210 bar of oil pressure. The oil pressure acts with a large viscid which is up to 20 times bigger than the water plunger. 210 bar of oil pressure intensifies the water pressure beyond 4,100 bar of oil pressure. The water is compressed by approximately 13 percent as the 4,100 bar of oil pressure drives it.

A continuous water pressure is guaranteed by the large shock attenuator integrated in the high pressure plumbing system. The plumbing system also includes flexible tubing. Through this tubing the water is pumped into the cutting head. In the cutting head a small head held with a jewel creates the pressure into velocity. The hole in the orifice is approximately the size of a human hair.

The resulting stream travels three times faster than the speed of sound. This super sonic stream is a powerful cutting tool a tool capable of cutting a wide variety of materials. To give you an idea of the waterjet power the water pressure in your home is about seventy pounds per square inch or psi. A waterjet operates at 60,000 psi. That means the water is leaving the nozzle at more than 900 miles per hour.

The waterjet is used on soft materials such as foam, paper, food, gasket… For hard materials like steel and even titanium, abrasives are mixed with the water. The abrasives work with the water to cut through hard substances.

All metals, stone, glass or fiber reinforced materials can be can be cut very easily. In this process the waterjet accelerates the abrasive and the result is an accurate cut leaving a satin smooth edge. The system assures flaw free cutting into stone, glass, or even into fiber reinforced materials.

Granite counter tops are cut with a waterjet and foam packing is cut by the waterjet which shows how versatile the machine is. The waterjet never gets dull. You can forget about spending time with predrilling. It is a step you can skip with the waterjet. The waterjet is the future of cutting. Take a look at this cutting edge technology today. By the way a lot of airplane materials are cut by the waterjet because the metal cannot go through the normal temperature rise a metal blade would cause.

Want to find out more about waterjet cutting, then visit our site on how to choose the best jet cutter for your needs.

Other articles you might like;

Tagged with: •

Filed under: home improvement

Like this post? Subscribe to my RSS feed and get loads more!