In this article let us learn How to Bridge Two Car Audio Amps in six easy steps and the advantages of bridging two car amplifiers with tips and warning for doing this job perfectly. Let us learn to get it right the first time itself because wrong connection may blow out the speakers or even burn the amps or sometimes in the worst case both may happen.

With the help of this discussion things can be made for aspirants who want to connect it by themselves. The things that are required for bridging amps are a set of pliers, wire strippers, wrenches, wires that are capable of handling the power of the amps along with good quality amplifiers.

The first step is to carefully study the instruction manual to ensure which two amplifiers can be connected together. Power compatibility will determine if the bridge would be safe or not. Sometimes we may have a doubt if these two amps can be bridged. In that case don\’t make an attempt to do that as it may burn the amps. Safe bridging is very important or else the loss incurred from improper connection may become very expensive.

Then the supply of power is cut from the two amplifiers. This is done by removing the cable from the positive end of the battery of the car with the help of pliers or wrench. It can remain in such a way till the amplifiers are completely bridged.

There will be a bridge switch at the rear end of each amp usually. Turn on that switch in case if it is there. Take a wire . Remove the insulation to about half inch in both the ends of the wire taken.

The most important thing to be done is the connection of the wires. The positive terminal of one amplifier holds one end of the wire while the other end is held by the negative terminal of the other amplifier. This can be performed by wrapping them around its corresponding terminal and then screwing them down. There is a clear distinction between the positive and negative terminals which is given by its color difference where red indicates positive and black indicates negative terminal.

The other terminals that are free are connected to the speakers. The positive end of one of the two amplifiers is connected to positive end of the speaker. Similarly, the negative end of the amp is connected with the negative end of the speaker.

With this article the question of how to bridge two car audio amps becomes easy. Though the instructions are enough to carry out the bridging it is very important to keep in mind that if there is any uncertainty the bridging must not be done. Since this might lead to damage in the speakers and also the amplifiers.

Learn more about Autozubehoer. Stop by Author Name\’s site where you can find out all about Car stereo and what it can do for you.